AgWorld Equipment

  • 30 Highway 3
  • Kinistino, SK S0J 1H0
  • Call Us: (306) 864-2200
  • https://www.agworld.com/
Print This Page

2024 Amazone Ceus-TX 3000-TX

Information

2024 Amazone Ceus-TX 3000-TX

The Ceus trailed disc & tine combination cultivator, in working widths from 3 m to 7 m, is ideal for the deep loosening of soils together with the simultaneous incorporation of a large amount of organic matter at the shallowest possible depth. The combination of a disc element followed by tines enables the Ceus to offer the advantages of both disc harrows and cultivators in a single compact machine. The Ceus is recommended for stubble cultivation, but can also be used for primary soil tillage, deep loosening and seedbed preparation.

Features may include:

Shallow soil tillage with intensive mixing and deep loosening in only one pass

Intensive mixing of the soil and reliable depth control combined with low fuel consumption

Disc element with maintenance-free disc bearings, stone safety release via the elastic sprung rubber buffer blocks and individual disc suspension

Excellent quality of work even under the most arduous of conditions, made possible by the high release forces of the overload protection system on the C-Mix Super and C-Mix Ultra tines

High manoeuvrability on the headland and excellent driving characteristics on the road thanks to the oversized centre running gear

Photos

Highlights

  • Kinistino, Saskatchewan
  • 2024
  • Amazone
  • Ceus-TX 3000-TX
  • Tine execution: Super
  • Available
  • Frame: 80 cm

Specifications

  • 2024
  • Amazone
  • Ceus-TX
  • 3000-TX
  • Cultivator
  • requirement from: 50 – 80 hp
  • Operational: 8 – 15 km/h
  • No. of d/a tractor spool valves: 2
  • Tine execution: Super
  • Linkage: Lower link
  • Tine spacing: tine element: 42.80 cm | Angle of attack: front 17°/ rear 14 | Disc diameter/ thickness: 510/5 mm | Disc spacing: 250 mm | Tine spacing: discs 125 mm
  • 3.00 m
  • Working: disc element 5 – 14 cm | Tine element: 5 – 35 4 cm
  • with road lights: 8.40 m
  • 3.00 m
  • 1.99 m
  • Frame: 80 cm
  • Permitted support: 900kg
  • without roller: 4,431 kg | (Base machine, simplest execution, KW580): 4,785 kg
  • Execution: rigid | No. of discs: 24 | No. of tines: 7 | Number of tine rows: 2